The activating emulsion is intended for mixing with DiaLight and DiaRichesse.Preparation: Put on rubber gloves. Mix one DiaLight 50 ml ammonia-free cream tube with DiaActivator 75 ml. Use only with the recommended oxidants 6 vol (1.8%), 9 vol (2.7%) or 15 vol (4.5%) max. / Do not use with hydrogen peroxide higher than 15 vol (4.5%) Follow the instructions.If you are using a shaker, open it immediately after mixing the paint to prevent damage. Squeeze 1 tube (50 ml of DiaLight staining cream in a bowl or shaker, add 75 ml of activator DiaActivateur emulsion. The amount can be reduced as needed, but keep ratio 1: 1.5Light-based dyeing: Use activating emulsion 6 vol. Suitable for re-staining on the same day and for application to already colored lengths and ends hair or to revive the existing color. Dyeing to preserve color shade: Use activating emulsion 9 vol. Suitable for coloring 30% gray gray hair color: Use activating emulsion 15 vol. Suitable for coloring 70% gray hair. Application and rinsing: Do not use metal utensils. Rinse the color thoroughly from the hair after application.Use: 1. Apply mixture for dry unwashed hair. If you dye your hair the same day it took place balancing procedure, apply to towel-dried hair. 2. Leave on for 20 minutes. Foam gently. 3. Rinse thoroughly and use post-stain care shampoo hair.Special applications: Emphasis of glare while maintaining a natural tone: exposure time 5 to 10 minutes. Darkening or refreshing the color: exposure time 20 minutes. Unifying the color: apply the color to the roots and 20 minutes before the end continue the action lengthwise to the ends. Creating a natural shine hair: exposure time 20-30 minutes. Hair coloring on the same day as permanent or balancing procedure: use activating emulsion 6 vol (1.8%) or 9 vol (2.7%). Leave on for 10 minutes.1000 ml